From 72ffb5d2364031962dc0342bf588c969d022c968 Mon Sep 17 00:00:00 2001 From: jiacai_wang Date: Mon, 23 Apr 2018 22:51:24 +0800 Subject: [PATCH] Add files via upload --- main.c | 281 +++++++++++ pwm.uvproj | 443 ++++++++++++++++ startup_stm32f10x_md.s | 307 +++++++++++ system_stm32f10x.c | 1094 ++++++++++++++++++++++++++++++++++++++++ 4 files changed, 2125 insertions(+) create mode 100644 main.c create mode 100644 pwm.uvproj create mode 100644 startup_stm32f10x_md.s create mode 100644 system_stm32f10x.c diff --git a/main.c b/main.c new file mode 100644 index 0000000..f0e11f1 --- /dev/null +++ b/main.c @@ -0,0 +1,281 @@ +#include + +//延时用于指示灯闪烁 +void delay(int k) +{ + while(k--) + { + int i=1000; + while(i--) + { + int j=100; + while(j--); + } + } +} + + + +//各舵机复位 +void ServoInit() +{ + TIM3->CCR2=2100; + delay(20); + TIM2->CCR4=1000; + delay(20); + TIM2->CCR3=2300; + delay(20); + TIM2->CCR2=850; + delay(20); + TIM2->CCR1=1400; + delay(50); //各舵机复位 +} + +//初始化TIM2的四个通道为PWM模式1 +void TIM2_Init() +{ + RCC->APB1ENR|=3; //TIM2，TIM3时钟使能 + RCC->APB2ENR|=1<<2; //GPIOA时钟使能 + + GPIOA->CRL=0xB333BBBB; //GPIOA.0-3,7复用推挽输出，GPIOA.4-6通用推挽输出 + + TIM2->PSC=71; + TIM3->PSC=71; //CNT频率1MHz + TIM2->ARR=20000; + TIM3->ARR=20000; //PWM周期20ms + + TIM2->CCMR1|=6<<4; //CH1配置PWM1模式 + TIM2->CCMR1|=1<<3; //CH1自动重装载预装载使能 + TIM2->CCER|=1; //CH1比较使能 + TIM2->CCMR1|=6<<12; //CH2配置PWM1模式 + TIM2->CCMR1|=1<<11; //CH2自动重装载预装载使能 + TIM2->CCER|=1<<4; //CH2比较使能 + TIM2->CCMR2|=6<<4; //CH3配置PWM1模式 + TIM2->CCMR2|=1<<3; //CH3自动重装载预装载使能 + TIM2->CCER|=1<<8; //CH3比较使能 + TIM2->CCMR2|=6<<12; //CH4配置PWM1模式 + TIM2->CCMR2|=1<<11; //CH4自动重装载预装载使能 + TIM2->CCER|=1<<12; //CH4比较使能 + TIM3->CCMR1|=6<<12; //CH2配置PWM1模式 + TIM3->CCMR1|=1<<11; //CH2自动重装载预装载使能 + TIM3->CCER|=1<<4; //CH2比较使能 + + TIM2->CR1|=1<<7; //TIM2自动重装载预装载使能 + TIM3->CR1|=1<<7; //TIM3自动重装载预装载使能 + TIM2->CR1|=1; //TIM2使能 + TIM3->CR1|=1; //TIM3使能 + +// -90 530 +// 0 1400 +// +90 2400 +//大约100对应10度 + ServoInit(); + +} + +//颜色识别模块初始化代码 +void Color_Init() +{ + GPIOA->BSRR=1<<4; + GPIOA->BSRR=1<<5; + GPIOA->BSRR=1<<6; + delay(50); + GPIOA->BRR=1<<4; + GPIOA->BRR=1<<5; + GPIOA->BRR=1<<6; + delay(20); +} + +//初始化GPIOC用于工作指示灯 +void GPIOC_Init() +{ + RCC->APB2ENR|=1<<4; //GPIOC时钟使能 + GPIOC->CRH=0; + GPIOC->CRH|=3<<20; //配置PC.13口为通用推挽输出 +} + + +//抓手释放 +void release() +{ + TIM3->CCR2=1400; + delay(10); +} + +//抓手夹持 +void hold() +{ + TIM3->CCR2=2100; + delay(10); +} + +void moveServo1(int i) +{ + if(i>2400||i<530) return; + while(TIM2->CCR1>i) + { + TIM2->CCR1-=10; + delay(1); + } + while(TIM2->CCR1CCR1+=10; + delay(1); + } +} + +void moveServo2(int i) +{ + if(i>2400||i<530) return; + while(TIM2->CCR2>i) + { + TIM2->CCR2-=10; + delay(1); + } + while(TIM2->CCR2CCR2+=10; + delay(1); + } +} + +void moveServo3(int i) +{ + if(i>2400||i<530) return; + while(TIM2->CCR3>i) + { + TIM2->CCR3-=10; + delay(1); + } + while(TIM2->CCR3CCR3+=10; + delay(1); + } +} + + +void moveServo4(int i) +{ + if(i>2400||i<530) return; + while(TIM2->CCR4>i) + { + TIM2->CCR4-=10; + delay(1); + } + while(TIM2->CCR4CCR4+=10; + delay(1); + } +} + + +void catch30() +{ + moveServo4(1200); + moveServo3(2000); + moveServo1(820); + release(); + moveServo2(1570); + hold(); + moveServo2(850); + moveServo1(2200); + moveServo4(1300); + moveServo3(2300); + moveServo2(1400); + release(); + delay(20); + moveServo1(1950); + delay(10); + moveServo2(850); + ServoInit(); +} + +void catch60() +{ + moveServo4(1000); + moveServo3(1600); + moveServo1(1100); + release(); + moveServo2(1770); + hold(); + moveServo2(850); + moveServo1(2270); + moveServo4(1250); + moveServo3(2100); + moveServo2(1450); + release(); + delay(20); + moveServo1(2100); + delay(10); + moveServo2(850); + ServoInit(); +} + + +void catch135() +{ + moveServo4(1200); + moveServo3(2000); + moveServo1(1900); + release(); + moveServo2(1570); + hold(); + moveServo2(850); + moveServo1(2350); + moveServo4(900); + moveServo3(1600); + moveServo2(1700); + release(); + delay(20); + moveServo1(2100); + delay(10); + moveServo2(850); + ServoInit(); +} + + +int main() +{ + TIM2_Init(); + GPIOC_Init(); + Color_Init(); + catch30(); + catch60(); + catch135(); + + while(1) + { + GPIOC->BSRR=1<<13; //开PC.13 + delay(5); + GPIOC->BRR=1<<13; //关PC.13 + delay(3); + } + + +/* + while(1) + { + while(TIM2->CCR4<1100) + { + TIM2->CCR4+=20; + TIM2->CCR3+=20; + TIM2->CCR2+=10; + delay(1); + } + delay(3); + while(TIM2->CCR4>530) + { + TIM2->CCR4-=20; + TIM2->CCR3-=20; + TIM2->CCR2-=10; + delay(1); + } + delay(3); + } + +*/ + + +} diff --git a/pwm.uvproj b/pwm.uvproj new file mode 100644 index 0000000..4caaeab --- /dev/null +++ b/pwm.uvproj @@ -0,0 +1,443 @@ + + + + 1.1 + +
### uVision Project, (C) Keil Software
+ + + + Target 1 + 0x4 + ARM-ADS + 5060528::V5.06 update 5 (build 528)::ARMCC + 0 + + + STM32F103C8 + STMicroelectronics + IRAM(0x20000000-0x20004FFF) IROM(0x8000000-0x800FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3") + + "STARTUP\ST\STM32F10x\startup_stm32f10x_md.s" ("STM32 Medium Density Line Startup Code") + UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_128 -FS08000000 -FL010000) + 4235 + stm32f10x.h + + + + + + + + + + SFD\ST\STM32F1xx\STM32F103xx.sfrSVD=SFD\ST\STM32F1xx\STM32F103xx.sfr + 0 + 0 + + + + ST\STM32F10x\ + ST\STM32F10x\ + + 0 + 0 + 0 + 0 + 1 + + .\Objects\ + pwm + 1 + 0 + 1 + 1 + 1 + .\Listings\ + 1 + 0 + 0 + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + + 0 + 0 + + + 0 + 0 + 0 + 0 + + 0 + + + + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 3 + + + 1 + + + SARMCM3.DLL + + DARMSTM.DLL + -pSTM32F103C8 + SARMCM3.DLL + + TARMSTM.DLL + -pSTM32F103C8 + + + + 1 + 0 + 0 + 0 + 16 + + + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + + + 0 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 1 + + 0 + 0 + + + + + + + + + + + + + + BIN\UL2CM3.DLL + + + + + 1 + 0 + 0 + 1 + 0 + -1 + + 1 + BIN\UL2CM3.DLL + + + + + + 0 + + + + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 1 + 1 + 0 + 1 + 1 + 0 + 0 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 1 + 0 + 0 + "Cortex-M3" + + 0 + 0 + 0 + 1 + 1 + 0 + 0 + 0 + 0 + 0 + 8 + 0 + 0 + 0 + 0 + 3 + 3 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 1 + 0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 1 + 0x8000000 + 0x10000 + + + 0 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x0 + 0x0 + + + 1 + 0x8000000 + 0x10000 + + + 1 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x0 + 0x0 + + + 0 + 0x20000000 + 0x5000 + + + 0 + 0x0 + 0x0 + + + + + + 1 + 1 + 0 + 0 + 1 + 0 + 0 + 0 + 0 + 0 + 2 + 0 + 0 + 1 + 0 + 1 + 1 + 1 + 1 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + 0 + + + + + + + + + 1 + 0 + 0 + 0 + 1 + 0 + 0x08000000 + 0x20000000 + + + + + + + + + + + + + Source Group 1 + + + startup_stm32f10x_md.s + 2 + .\startup_stm32f10x_md.s + + + main.c + 1 + .\main.c + + + system_stm32f10x.c + 1 + .\system_stm32f10x.c + + + + + + + + diff --git a/startup_stm32f10x_md.s b/startup_stm32f10x_md.s new file mode 100644 index 0000000..3223fc9 --- /dev/null +++ b/startup_stm32f10x_md.s @@ -0,0 +1,307 @@ +;******************** (C) COPYRIGHT 2011 STMicroelectronics ******************** +;* File Name : startup_stm32f10x_md.s +;* Author : MCD Application Team +;* Version : V3.5.0 +;* Date : 11-March-2011 +;* Description : STM32F10x Medium Density Devices vector table for MDK-ARM +;* toolchain. +;* This module performs: +;* - Set the initial SP +;* - Set the initial PC == Reset_Handler +;* - Set the vector table entries with the exceptions ISR address +;* - Configure the clock system +;* - Branches to __main in the C library (which eventually +;* calls main()). +;* After Reset the CortexM3 processor is in Thread mode, +;* priority is Privileged, and the Stack is set to Main. +;* <<< Use Configuration Wizard in Context Menu >>> +;******************************************************************************* +; THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS +; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME. +; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT, +; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE +; CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING +; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. +;******************************************************************************* + +; Amount of memory (in bytes) allocated for Stack +; Tailor this value to your application needs +; Stack Configuration +; Stack Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Stack_Size EQU 0x00000400 + + AREA STACK, NOINIT, READWRITE, ALIGN=3 +Stack_Mem SPACE Stack_Size +__initial_sp + + +; Heap Configuration +; Heap Size (in Bytes) <0x0-0xFFFFFFFF:8> +; + +Heap_Size EQU 0x00000200 + + AREA HEAP, NOINIT, READWRITE, ALIGN=3 +__heap_base +Heap_Mem SPACE Heap_Size +__heap_limit + + PRESERVE8 + THUMB + + +; Vector Table Mapped to Address 0 at Reset + AREA RESET, DATA, READONLY + EXPORT __Vectors + EXPORT __Vectors_End + EXPORT __Vectors_Size + +__Vectors DCD __initial_sp ; Top of Stack + DCD Reset_Handler ; Reset Handler + DCD NMI_Handler ; NMI Handler + DCD HardFault_Handler ; Hard Fault Handler + DCD MemManage_Handler ; MPU Fault Handler + DCD BusFault_Handler ; Bus Fault Handler + DCD UsageFault_Handler ; Usage Fault Handler + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD 0 ; Reserved + DCD SVC_Handler ; SVCall Handler + DCD DebugMon_Handler ; Debug Monitor Handler + DCD 0 ; Reserved + DCD PendSV_Handler ; PendSV Handler + DCD SysTick_Handler ; SysTick Handler + + ; External Interrupts + DCD WWDG_IRQHandler ; Window Watchdog + DCD PVD_IRQHandler ; PVD through EXTI Line detect + DCD TAMPER_IRQHandler ; Tamper + DCD RTC_IRQHandler ; RTC + DCD FLASH_IRQHandler ; Flash + DCD RCC_IRQHandler ; RCC + DCD EXTI0_IRQHandler ; EXTI Line 0 + DCD EXTI1_IRQHandler ; EXTI Line 1 + DCD EXTI2_IRQHandler ; EXTI Line 2 + DCD EXTI3_IRQHandler ; EXTI Line 3 + DCD EXTI4_IRQHandler ; EXTI Line 4 + DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1 + DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2 + DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3 + DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4 + DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5 + DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6 + DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7 + DCD ADC1_2_IRQHandler ; ADC1_2 + DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX + DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0 + DCD CAN1_RX1_IRQHandler ; CAN1 RX1 + DCD CAN1_SCE_IRQHandler ; CAN1 SCE + DCD EXTI9_5_IRQHandler ; EXTI Line 9..5 + DCD TIM1_BRK_IRQHandler ; TIM1 Break + DCD TIM1_UP_IRQHandler ; TIM1 Update + DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation + DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare + DCD TIM2_IRQHandler ; TIM2 + DCD TIM3_IRQHandler ; TIM3 + DCD TIM4_IRQHandler ; TIM4 + DCD I2C1_EV_IRQHandler ; I2C1 Event + DCD I2C1_ER_IRQHandler ; I2C1 Error + DCD I2C2_EV_IRQHandler ; I2C2 Event + DCD I2C2_ER_IRQHandler ; I2C2 Error + DCD SPI1_IRQHandler ; SPI1 + DCD SPI2_IRQHandler ; SPI2 + DCD USART1_IRQHandler ; USART1 + DCD USART2_IRQHandler ; USART2 + DCD USART3_IRQHandler ; USART3 + DCD EXTI15_10_IRQHandler ; EXTI Line 15..10 + DCD RTCAlarm_IRQHandler ; RTC Alarm through EXTI Line + DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend +__Vectors_End + +__Vectors_Size EQU __Vectors_End - __Vectors + + AREA |.text|, CODE, READONLY + +; Reset handler +Reset_Handler PROC + EXPORT Reset_Handler [WEAK] + IMPORT __main + IMPORT SystemInit + LDR R0, =SystemInit + BLX R0 + LDR R0, =__main + BX R0 + ENDP + +; Dummy Exception Handlers (infinite loops which can be modified) + +NMI_Handler PROC + EXPORT NMI_Handler [WEAK] + B . + ENDP +HardFault_Handler\ + PROC + EXPORT HardFault_Handler [WEAK] + B . + ENDP +MemManage_Handler\ + PROC + EXPORT MemManage_Handler [WEAK] + B . + ENDP +BusFault_Handler\ + PROC + EXPORT BusFault_Handler [WEAK] + B . + ENDP +UsageFault_Handler\ + PROC + EXPORT UsageFault_Handler [WEAK] + B . + ENDP +SVC_Handler PROC + EXPORT SVC_Handler [WEAK] + B . + ENDP +DebugMon_Handler\ + PROC + EXPORT DebugMon_Handler [WEAK] + B . + ENDP +PendSV_Handler PROC + EXPORT PendSV_Handler [WEAK] + B . + ENDP +SysTick_Handler PROC + EXPORT SysTick_Handler [WEAK] + B . + ENDP + +Default_Handler PROC + + EXPORT WWDG_IRQHandler [WEAK] + EXPORT PVD_IRQHandler [WEAK] + EXPORT TAMPER_IRQHandler [WEAK] + EXPORT RTC_IRQHandler [WEAK] + EXPORT FLASH_IRQHandler [WEAK] + EXPORT RCC_IRQHandler [WEAK] + EXPORT EXTI0_IRQHandler [WEAK] + EXPORT EXTI1_IRQHandler [WEAK] + EXPORT EXTI2_IRQHandler [WEAK] + EXPORT EXTI3_IRQHandler [WEAK] + EXPORT EXTI4_IRQHandler [WEAK] + EXPORT DMA1_Channel1_IRQHandler [WEAK] + EXPORT DMA1_Channel2_IRQHandler [WEAK] + EXPORT DMA1_Channel3_IRQHandler [WEAK] + EXPORT DMA1_Channel4_IRQHandler [WEAK] + EXPORT DMA1_Channel5_IRQHandler [WEAK] + EXPORT DMA1_Channel6_IRQHandler [WEAK] + EXPORT DMA1_Channel7_IRQHandler [WEAK] + EXPORT ADC1_2_IRQHandler [WEAK] + EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK] + EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK] + EXPORT CAN1_RX1_IRQHandler [WEAK] + EXPORT CAN1_SCE_IRQHandler [WEAK] + EXPORT EXTI9_5_IRQHandler [WEAK] + EXPORT TIM1_BRK_IRQHandler [WEAK] + EXPORT TIM1_UP_IRQHandler [WEAK] + EXPORT TIM1_TRG_COM_IRQHandler [WEAK] + EXPORT TIM1_CC_IRQHandler [WEAK] + EXPORT TIM2_IRQHandler [WEAK] + EXPORT TIM3_IRQHandler [WEAK] + EXPORT TIM4_IRQHandler [WEAK] + EXPORT I2C1_EV_IRQHandler [WEAK] + EXPORT I2C1_ER_IRQHandler [WEAK] + EXPORT I2C2_EV_IRQHandler [WEAK] + EXPORT I2C2_ER_IRQHandler [WEAK] + EXPORT SPI1_IRQHandler [WEAK] + EXPORT SPI2_IRQHandler [WEAK] + EXPORT USART1_IRQHandler [WEAK] + EXPORT USART2_IRQHandler [WEAK] + EXPORT USART3_IRQHandler [WEAK] + EXPORT EXTI15_10_IRQHandler [WEAK] + EXPORT RTCAlarm_IRQHandler [WEAK] + EXPORT USBWakeUp_IRQHandler [WEAK] + +WWDG_IRQHandler +PVD_IRQHandler +TAMPER_IRQHandler +RTC_IRQHandler +FLASH_IRQHandler +RCC_IRQHandler +EXTI0_IRQHandler +EXTI1_IRQHandler +EXTI2_IRQHandler +EXTI3_IRQHandler +EXTI4_IRQHandler +DMA1_Channel1_IRQHandler +DMA1_Channel2_IRQHandler +DMA1_Channel3_IRQHandler +DMA1_Channel4_IRQHandler +DMA1_Channel5_IRQHandler +DMA1_Channel6_IRQHandler +DMA1_Channel7_IRQHandler +ADC1_2_IRQHandler +USB_HP_CAN1_TX_IRQHandler +USB_LP_CAN1_RX0_IRQHandler +CAN1_RX1_IRQHandler +CAN1_SCE_IRQHandler +EXTI9_5_IRQHandler +TIM1_BRK_IRQHandler +TIM1_UP_IRQHandler +TIM1_TRG_COM_IRQHandler +TIM1_CC_IRQHandler +TIM2_IRQHandler +TIM3_IRQHandler +TIM4_IRQHandler +I2C1_EV_IRQHandler +I2C1_ER_IRQHandler +I2C2_EV_IRQHandler +I2C2_ER_IRQHandler +SPI1_IRQHandler +SPI2_IRQHandler +USART1_IRQHandler +USART2_IRQHandler +USART3_IRQHandler +EXTI15_10_IRQHandler +RTCAlarm_IRQHandler +USBWakeUp_IRQHandler + + B . + + ENDP + + ALIGN + +;******************************************************************************* +; User Stack and Heap initialization +;******************************************************************************* + IF :DEF:__MICROLIB + + EXPORT __initial_sp + EXPORT __heap_base + EXPORT __heap_limit + + ELSE + + IMPORT __use_two_region_memory + EXPORT __user_initial_stackheap + +__user_initial_stackheap + + LDR R0, = Heap_Mem + LDR R1, =(Stack_Mem + Stack_Size) + LDR R2, = (Heap_Mem + Heap_Size) + LDR R3, = Stack_Mem + BX LR + + ALIGN + + ENDIF + + END + +;******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE***** diff --git a/system_stm32f10x.c b/system_stm32f10x.c new file mode 100644 index 0000000..6fb4579 --- /dev/null +++ b/system_stm32f10x.c @@ -0,0 +1,1094 @@ +/** + ****************************************************************************** + * @file system_stm32f10x.c + * @author MCD Application Team + * @version V3.5.0 + * @date 11-March-2011 + * @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File. + * + * 1. This file provides two functions and one global variable to be called from + * user application: + * - SystemInit(): Setups the system clock (System clock source, PLL Multiplier + * factors, AHB/APBx prescalers and Flash settings). + * This function is called at startup just after reset and + * before branch to main program. This call is made inside + * the "startup_stm32f10x_xx.s" file. + * + * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used + * by the user application to setup the SysTick + * timer or configure other parameters. + * + * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must + * be called whenever the core clock is changed + * during program execution. + * + * 2. After each device reset the HSI (8 MHz) is used as system clock source. + * Then SystemInit() function is called, in "startup_stm32f10x_xx.s" file, to + * configure the system clock before to branch to main program. + * + * 3. If the system clock source selected by user fails to startup, the SystemInit() + * function will do nothing and HSI still used as system clock source. User can + * add some code to deal with this issue inside the SetSysClock() function. + * + * 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depedning on + * the product used), refer to "HSE_VALUE" define in "stm32f10x.h" file. + * When HSE is used as system clock source, directly or through PLL, and you + * are using different crystal you have to adapt the HSE value to your own + * configuration. + * + ****************************************************************************** + * @attention + * + * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS + * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE + * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY + * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING + * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE + * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS. + * + *

© COPYRIGHT 2011 STMicroelectronics

+ ****************************************************************************** + */ + +/** @addtogroup CMSIS + * @{ + */ + +/** @addtogroup stm32f10x_system + * @{ + */ + +/** @addtogroup STM32F10x_System_Private_Includes + * @{ + */ + +#include "stm32f10x.h" + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_TypesDefinitions + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Defines + * @{ + */ + +/*!< Uncomment the line corresponding to the desired System clock (SYSCLK) + frequency (after reset the HSI is used as SYSCLK source) + + IMPORTANT NOTE: + ============== + 1. After each device reset the HSI is used as System clock source. + + 2. Please make sure that the selected System clock doesn't exceed your device's + maximum frequency. + + 3. If none of the define below is enabled, the HSI is used as System clock + source. + + 4. The System clock configuration functions provided within this file assume that: + - For Low, Medium and High density Value line devices an external 8MHz + crystal is used to drive the System clock. + - For Low, Medium and High density devices an external 8MHz crystal is + used to drive the System clock. + - For Connectivity line devices an external 25MHz crystal is used to drive + the System clock. + If you are using different crystal you have to adapt those functions accordingly. + */ + +#if defined (STM32F10X_LD_VL) || (defined STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ + #define SYSCLK_FREQ_24MHz 24000000 +#else +/* #define SYSCLK_FREQ_HSE HSE_VALUE */ +/* #define SYSCLK_FREQ_24MHz 24000000 */ +/* #define SYSCLK_FREQ_36MHz 36000000 */ +/* #define SYSCLK_FREQ_48MHz 48000000 */ +/* #define SYSCLK_FREQ_56MHz 56000000 */ +#define SYSCLK_FREQ_72MHz 72000000 +#endif + +/*!< Uncomment the following line if you need to use external SRAM mounted + on STM3210E-EVAL board (STM32 High density and XL-density devices) or on + STM32100E-EVAL board (STM32 High-density value line devices) as data memory */ +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) +/* #define DATA_IN_ExtSRAM */ +#endif + +/*!< Uncomment the following line if you need to relocate your vector Table in + Internal SRAM. */ +/* #define VECT_TAB_SRAM */ +#define VECT_TAB_OFFSET 0x0 /*!< Vector Table base offset field. + This value must be a multiple of 0x200. */ + + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Macros + * @{ + */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Variables + * @{ + */ + +/******************************************************************************* +* Clock Definitions +*******************************************************************************/ +#ifdef SYSCLK_FREQ_HSE + uint32_t SystemCoreClock = SYSCLK_FREQ_HSE; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_24MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_24MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_36MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_36MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_48MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_48MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_56MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_56MHz; /*!< System Clock Frequency (Core Clock) */ +#elif defined SYSCLK_FREQ_72MHz + uint32_t SystemCoreClock = SYSCLK_FREQ_72MHz; /*!< System Clock Frequency (Core Clock) */ +#else /*!< HSI Selected as System Clock source */ + uint32_t SystemCoreClock = HSI_VALUE; /*!< System Clock Frequency (Core Clock) */ +#endif + +__I uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_FunctionPrototypes + * @{ + */ + +static void SetSysClock(void); + +#ifdef SYSCLK_FREQ_HSE + static void SetSysClockToHSE(void); +#elif defined SYSCLK_FREQ_24MHz + static void SetSysClockTo24(void); +#elif defined SYSCLK_FREQ_36MHz + static void SetSysClockTo36(void); +#elif defined SYSCLK_FREQ_48MHz + static void SetSysClockTo48(void); +#elif defined SYSCLK_FREQ_56MHz + static void SetSysClockTo56(void); +#elif defined SYSCLK_FREQ_72MHz + static void SetSysClockTo72(void); +#endif + +#ifdef DATA_IN_ExtSRAM + static void SystemInit_ExtMemCtl(void); +#endif /* DATA_IN_ExtSRAM */ + +/** + * @} + */ + +/** @addtogroup STM32F10x_System_Private_Functions + * @{ + */ + +/** + * @brief Setup the microcontroller system + * Initialize the Embedded Flash Interface, the PLL and update the + * SystemCoreClock variable. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +void SystemInit (void) +{ + /* Reset the RCC clock configuration to the default reset state(for debug purpose) */ + /* Set HSION bit */ + RCC->CR |= (uint32_t)0x00000001; + + /* Reset SW, HPRE, PPRE1, PPRE2, ADCPRE and MCO bits */ +#ifndef STM32F10X_CL + RCC->CFGR &= (uint32_t)0xF8FF0000; +#else + RCC->CFGR &= (uint32_t)0xF0FF0000; +#endif /* STM32F10X_CL */ + + /* Reset HSEON, CSSON and PLLON bits */ + RCC->CR &= (uint32_t)0xFEF6FFFF; + + /* Reset HSEBYP bit */ + RCC->CR &= (uint32_t)0xFFFBFFFF; + + /* Reset PLLSRC, PLLXTPRE, PLLMUL and USBPRE/OTGFSPRE bits */ + RCC->CFGR &= (uint32_t)0xFF80FFFF; + +#ifdef STM32F10X_CL + /* Reset PLL2ON and PLL3ON bits */ + RCC->CR &= (uint32_t)0xEBFFFFFF; + + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x00FF0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; + + /* Reset CFGR2 register */ + RCC->CFGR2 = 0x00000000; +#else + /* Disable all interrupts and clear pending bits */ + RCC->CIR = 0x009F0000; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_HD) || (defined STM32F10X_XL) || (defined STM32F10X_HD_VL) + #ifdef DATA_IN_ExtSRAM + SystemInit_ExtMemCtl(); + #endif /* DATA_IN_ExtSRAM */ +#endif + + /* Configure the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers */ + /* Configure the Flash Latency cycles and enable prefetch buffer */ + SetSysClock(); + +#ifdef VECT_TAB_SRAM + SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */ +#else + SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH. */ +#endif +} + +/** + * @brief Update SystemCoreClock variable according to Clock Register Values. + * The SystemCoreClock variable contains the core clock (HCLK), it can + * be used by the user application to setup the SysTick timer or configure + * other parameters. + * + * @note Each time the core clock (HCLK) changes, this function must be called + * to update SystemCoreClock variable value. Otherwise, any configuration + * based on this variable will be incorrect. + * + * @note - The system frequency computed by this function is not the real + * frequency in the chip. It is calculated based on the predefined + * constant and the selected clock source: + * + * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) + * + * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) + * + * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) + * or HSI_VALUE(*) multiplied by the PLL factors. + * + * (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz) but the real value may vary depending on the variations + * in voltage and temperature. + * + * (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value + * 8 MHz or 25 MHz, depedning on the product used), user has to ensure + * that HSE_VALUE is same as the real frequency of the crystal used. + * Otherwise, this function may have wrong result. + * + * - The result of this function could be not correct when using fractional + * value for HSE crystal. + * @param None + * @retval None + */ +void SystemCoreClockUpdate (void) +{ + uint32_t tmp = 0, pllmull = 0, pllsource = 0; + +#ifdef STM32F10X_CL + uint32_t prediv1source = 0, prediv1factor = 0, prediv2factor = 0, pll2mull = 0; +#endif /* STM32F10X_CL */ + +#if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + uint32_t prediv1factor = 0; +#endif /* STM32F10X_LD_VL or STM32F10X_MD_VL or STM32F10X_HD_VL */ + + /* Get SYSCLK source -------------------------------------------------------*/ + tmp = RCC->CFGR & RCC_CFGR_SWS; + + switch (tmp) + { + case 0x00: /* HSI used as system clock */ + SystemCoreClock = HSI_VALUE; + break; + case 0x04: /* HSE used as system clock */ + SystemCoreClock = HSE_VALUE; + break; + case 0x08: /* PLL used as system clock */ + + /* Get PLL clock source and multiplication factor ----------------------*/ + pllmull = RCC->CFGR & RCC_CFGR_PLLMULL; + pllsource = RCC->CFGR & RCC_CFGR_PLLSRC; + +#ifndef STM32F10X_CL + pllmull = ( pllmull >> 18) + 2; + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + { + #if defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || (defined STM32F10X_HD_VL) + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + #else + /* HSE selected as PLL clock entry */ + if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET) + {/* HSE oscillator clock divided by 2 */ + SystemCoreClock = (HSE_VALUE >> 1) * pllmull; + } + else + { + SystemCoreClock = HSE_VALUE * pllmull; + } + #endif + } +#else + pllmull = pllmull >> 18; + + if (pllmull != 0x0D) + { + pllmull += 2; + } + else + { /* PLL multiplication factor = PLL input clock * 6.5 */ + pllmull = 13 / 2; + } + + if (pllsource == 0x00) + { + /* HSI oscillator clock divided by 2 selected as PLL clock entry */ + SystemCoreClock = (HSI_VALUE >> 1) * pllmull; + } + else + {/* PREDIV1 selected as PLL clock entry */ + + /* Get PREDIV1 clock source and division factor */ + prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC; + prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1; + + if (prediv1source == 0) + { + /* HSE oscillator clock selected as PREDIV1 clock entry */ + SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull; + } + else + {/* PLL2 clock selected as PREDIV1 clock entry */ + + /* Get PREDIV2 division factor and PLL2 multiplication factor */ + prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4) + 1; + pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8 ) + 2; + SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull; + } + } +#endif /* STM32F10X_CL */ + break; + + default: + SystemCoreClock = HSI_VALUE; + break; + } + + /* Compute HCLK clock frequency ----------------*/ + /* Get HCLK prescaler */ + tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; + /* HCLK clock frequency */ + SystemCoreClock >>= tmp; +} + +/** + * @brief Configures the System clock frequency, HCLK, PCLK2 and PCLK1 prescalers. + * @param None + * @retval None + */ +static void SetSysClock(void) +{ +#ifdef SYSCLK_FREQ_HSE + SetSysClockToHSE(); +#elif defined SYSCLK_FREQ_24MHz + SetSysClockTo24(); +#elif defined SYSCLK_FREQ_36MHz + SetSysClockTo36(); +#elif defined SYSCLK_FREQ_48MHz + SetSysClockTo48(); +#elif defined SYSCLK_FREQ_56MHz + SetSysClockTo56(); +#elif defined SYSCLK_FREQ_72MHz + SetSysClockTo72(); +#endif + + /* If none of the define above is enabled, the HSI is used as System clock + source (default after reset) */ +} + +/** + * @brief Setup the external memory controller. Called in startup_stm32f10x.s + * before jump to __main + * @param None + * @retval None + */ +#ifdef DATA_IN_ExtSRAM +/** + * @brief Setup the external memory controller. + * Called in startup_stm32f10x_xx.s/.c before jump to main. + * This function configures the external SRAM mounted on STM3210E-EVAL + * board (STM32 High density devices). This SRAM will be used as program + * data memory (including heap and stack). + * @param None + * @retval None + */ +void SystemInit_ExtMemCtl(void) +{ +/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is + required, then adjust the Register Addresses */ + + /* Enable FSMC clock */ + RCC->AHBENR = 0x00000114; + + /* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */ + RCC->APB2ENR = 0x000001E0; + +/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/ +/*---------------- SRAM Address lines configuration -------------------------*/ +/*---------------- NOE and NWE configuration --------------------------------*/ +/*---------------- NE3 configuration ----------------------------------------*/ +/*---------------- NBL0, NBL1 configuration ---------------------------------*/ + + GPIOD->CRL = 0x44BB44BB; + GPIOD->CRH = 0xBBBBBBBB; + + GPIOE->CRL = 0xB44444BB; + GPIOE->CRH = 0xBBBBBBBB; + + GPIOF->CRL = 0x44BBBBBB; + GPIOF->CRH = 0xBBBB4444; + + GPIOG->CRL = 0x44BBBBBB; + GPIOG->CRH = 0x44444B44; + +/*---------------- FSMC Configuration ---------------------------------------*/ +/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/ + + FSMC_Bank1->BTCR[4] = 0x00001011; + FSMC_Bank1->BTCR[5] = 0x00000200; +} +#endif /* DATA_IN_ExtSRAM */ + +#ifdef SYSCLK_FREQ_HSE +/** + * @brief Selects HSE as System clock source and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockToHSE(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + +#ifndef STM32F10X_CL + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#else + if (HSE_VALUE <= 24000000) + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; + } + else + { + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + } +#endif /* STM32F10X_CL */ +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + + /* Select HSE as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_HSE; + + /* Wait till HSE is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x04) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_24MHz +/** + * @brief Sets System clock frequency to 24MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo24(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { +#if !defined STM32F10X_LD_VL && !defined STM32F10X_MD_VL && !defined STM32F10X_HD_VL + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 0 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_0; +#endif + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); + + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } +#elif defined (STM32F10X_LD_VL) || defined (STM32F10X_MD_VL) || defined (STM32F10X_HD_VL) + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_PREDIV1 | RCC_CFGR_PLLXTPRE_PREDIV1_Div2 | RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: = (HSE / 2) * 6 = 24 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_36MHz +/** + * @brief Sets System clock frequency to 36MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo36(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV1; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); + + /*!< PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 10 = 4 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV10); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + +#else + /* PLL configuration: PLLCLK = (HSE / 2) * 9 = 36 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLXTPRE_HSE_Div2 | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#elif defined SYSCLK_FREQ_48MHz +/** + * @brief Sets System clock frequency to 48MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo48(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 1 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_1; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL6); +#else + /* PLL configuration: PLLCLK = HSE * 6 = 48 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL6); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_56MHz +/** + * @brief Sets System clock frequency to 56MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo56(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL7); +#else + /* PLL configuration: PLLCLK = HSE * 7 = 56 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL7); + +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} + +#elif defined SYSCLK_FREQ_72MHz +/** + * @brief Sets System clock frequency to 72MHz and configure HCLK, PCLK2 + * and PCLK1 prescalers. + * @note This function should be used only after reset. + * @param None + * @retval None + */ +static void SetSysClockTo72(void) +{ + __IO uint32_t StartUpCounter = 0, HSEStatus = 0; + + /* SYSCLK, HCLK, PCLK2 and PCLK1 configuration ---------------------------*/ + /* Enable HSE */ + RCC->CR |= ((uint32_t)RCC_CR_HSEON); + + /* Wait till HSE is ready and if Time out is reached exit */ + do + { + HSEStatus = RCC->CR & RCC_CR_HSERDY; + StartUpCounter++; + } while((HSEStatus == 0) && (StartUpCounter != HSE_STARTUP_TIMEOUT)); + + if ((RCC->CR & RCC_CR_HSERDY) != RESET) + { + HSEStatus = (uint32_t)0x01; + } + else + { + HSEStatus = (uint32_t)0x00; + } + + if (HSEStatus == (uint32_t)0x01) + { + /* Enable Prefetch Buffer */ + FLASH->ACR |= FLASH_ACR_PRFTBE; + + /* Flash 2 wait state */ + FLASH->ACR &= (uint32_t)((uint32_t)~FLASH_ACR_LATENCY); + FLASH->ACR |= (uint32_t)FLASH_ACR_LATENCY_2; + + + /* HCLK = SYSCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_HPRE_DIV1; + + /* PCLK2 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE2_DIV1; + + /* PCLK1 = HCLK */ + RCC->CFGR |= (uint32_t)RCC_CFGR_PPRE1_DIV2; + +#ifdef STM32F10X_CL + /* Configure PLLs ------------------------------------------------------*/ + /* PLL2 configuration: PLL2CLK = (HSE / 5) * 8 = 40 MHz */ + /* PREDIV1 configuration: PREDIV1CLK = PLL2 / 5 = 8 MHz */ + + RCC->CFGR2 &= (uint32_t)~(RCC_CFGR2_PREDIV2 | RCC_CFGR2_PLL2MUL | + RCC_CFGR2_PREDIV1 | RCC_CFGR2_PREDIV1SRC); + RCC->CFGR2 |= (uint32_t)(RCC_CFGR2_PREDIV2_DIV5 | RCC_CFGR2_PLL2MUL8 | + RCC_CFGR2_PREDIV1SRC_PLL2 | RCC_CFGR2_PREDIV1_DIV5); + + /* Enable PLL2 */ + RCC->CR |= RCC_CR_PLL2ON; + /* Wait till PLL2 is ready */ + while((RCC->CR & RCC_CR_PLL2RDY) == 0) + { + } + + + /* PLL configuration: PLLCLK = PREDIV1 * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)~(RCC_CFGR_PLLXTPRE | RCC_CFGR_PLLSRC | RCC_CFGR_PLLMULL); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLXTPRE_PREDIV1 | RCC_CFGR_PLLSRC_PREDIV1 | + RCC_CFGR_PLLMULL9); +#else + /* PLL configuration: PLLCLK = HSE * 9 = 72 MHz */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_PLLSRC | RCC_CFGR_PLLXTPRE | + RCC_CFGR_PLLMULL)); + RCC->CFGR |= (uint32_t)(RCC_CFGR_PLLSRC_HSE | RCC_CFGR_PLLMULL9); +#endif /* STM32F10X_CL */ + + /* Enable PLL */ + RCC->CR |= RCC_CR_PLLON; + + /* Wait till PLL is ready */ + while((RCC->CR & RCC_CR_PLLRDY) == 0) + { + } + + /* Select PLL as system clock source */ + RCC->CFGR &= (uint32_t)((uint32_t)~(RCC_CFGR_SW)); + RCC->CFGR |= (uint32_t)RCC_CFGR_SW_PLL; + + /* Wait till PLL is used as system clock source */ + while ((RCC->CFGR & (uint32_t)RCC_CFGR_SWS) != (uint32_t)0x08) + { + } + } + else + { /* If HSE fails to start-up, the application will have wrong clock + configuration. User can add here some code to deal with this error */ + } +} +#endif + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ +/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/